Knowledge base · Biomass market

Solid biomass for the energy sector — what industrial buyers require

Sunflower husks, forest and agro chips, agro pellets: which fuel parameters and which certificates open the doors of combined heat and power plants and industrial boiler plants.

Solid biomass for the energy sector means fuels obtained from wood, forest residues and agricultural materials — including sunflower husks, forest and agro chips and agro pellets — which CHP plants and boiler plants buy according to a specification of fuel parameters (moisture, ash, calorific value, fraction, chlorides), while requiring proof of sustainable sourcing confirmed by schemes such as SURE or KZR INiG, for RED II and KOBiZE accounting. For an agro producer this is a real sales channel — but one that demands quality and documentation discipline.

Key takeaways:

  • An industrial buyer purchases a fuel specification, not "biomass in general" — every delivery is tested or settled against declared parameters;
  • A sustainability certificate (SURE/KZR INiG) is often a condition of the contract, not a differentiator;
  • Parameters critical for agro biomass: ash, chlorides, moisture, fraction;
  • Entering the market: stream inventory → testing → classification → certification → contract;
  • We state parameter values indicatively — the binding documents are always the order specification and the scheme documents.

Main biomass streams for the energy sector

Sunflower husks

A residue from oil mills with a good calorific value (indicatively around 17–19 MJ/kg), but with ash usually in the range of around 3–7% and an elevated chlorine content. Sold loose, as briquettes or pellets. An attractively priced fuel, but it requires a boiler adapted to agro biomass: flue-gas passages resistant to chloride corrosion, efficient ash removal, control of sintering. Residual oil in the husks improves the calorific value, but worsens behaviour in storage (self-heating) — limit pile heights and storage time.

Forest chips

Shredded material from forest residues, thinning and energy wood. Trading is based on classification under EN ISO 17225-4: particle size (classes P16/P31/P45 etc.), moisture, ash. The key quality problems are moisture (fresh chips often have 45–55% — the buyer pays for a tonne of fuel, not a tonne of water) and mineral contamination during harvesting. Large CHP plants are the biggest but also the most demanding buyers: contract volumes, delivery quality control and penalty settlements for parameters.

Agro chips and biomass

Straw, maize residues, miscanthus, energy willow — shredded or in bales. High volume potential, but parameters vary seasonally; chlorides and ash are usually significantly higher than in wood. The market is limited to boilers designed or adapted for agro biomass.

Agro pellets

Pellets from husks, straw or agro blends, classified under EN ISO 17225-6. Pelleting makes the parameters uniform and simplifies logistics, but the cost of pelleting must be justified in the price. Note: agro pellets do not meet the A1/B classes of the standard for wood pellets — they are a separate product with its own specification, aimed at industrial buyers, not the A1 retail market.

Which fuel parameters buyers require

Every CHP plant or boiler plant works with a fuel specification consistent with the boiler design. Typical contractual requirements (indicative ranges):

ParameterWhy the buyer watches itTypical consequences of exceedance
MoistureLowers the NCV of a tonne of fuel and boiler efficiencyRecalculation of the settlement, discount or rejection of the delivery
Net calorific valueBasis for price settlement (price/GJ)Price recalculation, contractual penalties
AshLoad on the ash system, dust emissionsPenalties, in extreme cases termination of the contract
ChloridesHigh-temperature corrosion of heating surfacesAbsolute limit in the specification — rejection
Fraction / particle size distributionOperation of feeders and fire protection safeguardsUnloading problems, refusal of acceptance
Foreign contaminationBoiler safety and emission rightsRejection, claims

The standard is testing of each delivery (samples at unloading) or acceptance of results from the supplier's laboratory if it is accredited. Disputed results are settled by a reference sample tested in an agreed laboratory — take care of the sampling and reference sample storage procedure on your side.

Sustainability certificates: SURE and KZR INiG

Beyond fuel quality, the buyer needs proof that the biomass meets the sustainability and greenhouse gas emission reduction criteria of the RED II directive — without this, the fuel cannot be counted towards RES results or emission accounting. The proof is a chain of certificates from a voluntary scheme: in Poland the dominant ones are KZR INiG (the national certification scheme operated by INSTAL, covering among others producers, collection points, processors and biomass users) and SURE (the European scheme operated, among others, by REDcert, preferred in international contracts).

In practice: every link in the chain that physically takes over certified biomass — producer, collection point, processor, warehouse, user — needs an entry in the appropriate scope of the scheme. Certification covers batch traceability, mass balance, raw material origin documentation and data for emission calculations. We describe the scope details on the SURE and KZR INiG pages.

RED II and KOBiZE accounting

Large installations report emissions in the ETS system and account for biomass with a zero emission factor only when it meets the sustainability criteria — reporting is carried out, among others, through KOBiZE (the National Centre for Emissions Management). For the supplier this means the buyer will require scheme certificates for every delivery and will periodically verify its records (mass balance, raw material origin). A missing set of documents for a single delivery can "expose" the sustainability of the buyer's entire accounting period — which is why supplier controls are so strict.

How an agro producer enters this market

  1. Stream inventory — how many tonnes per year, in which months, in what physical form; realistically, taking losses into account;
  2. Laboratory tests — moisture, ash, NCV, chlorides, sulphur, particle size distribution; representative samples, accredited laboratory;
  3. Classification under the standards — assignment to classes of the EN ISO 17225 series (e.g. 17225-4 for chips, 17225-6 for agro pellets) and preparation of a product sheet;
  4. Buyer reconnaissance — which boilers in the region accept the given fuel type, what specifications and what certificates they require (public tender terms are sometimes publicly available);
  5. Decision on the form of entry — own certification (with a large volume) or sales through a certified collection point;
  6. Scope certification — choice of scheme (KZR INiG/SURE), implementation of traceability and mass balance, audit;
  7. Contracting — first test deliveries with testing at unloading, then a framework contract with an agreed specification and quality settlement mechanisms.

The whole process, from the decision to the first contract, takes indicatively from several months to over a year — usually the longest part is not certification, but stabilising the quality of the stream and the logistics.

Quality settlements and contractual risks

Industrial biomass contracts are settled on quality, most often according to a price per unit of energy (price/GJ): the actual value of a delivery depends on the measured moisture, ash and calorific value of the batch. This changes the economics of production — wetting or deterioration of parameters "within tolerance" does not exist, because every percentage point of moisture converts into price. Contracts also include penalties for exceeding absolute limits (e.g. chlorides) and penalties for failing to meet the volume.

Practical safeguards on the producer's side: reference samples from every test delivery, your own tests before dispatch (a cheap insurance policy against disputes), a clear complaints procedure with deadlines and liability insurance covering quality damage. With first contracts it is worth starting with test deliveries with joint sampling — this builds trust and establishes the practice of settlements on both sides before you sign a multi-year framework contract.

Forest and forest residues — raw material for forest chips for the energy sector with a sustainability certificate

Frequently asked questions

Yes — sunflower husks (loose, as briquettes or pellets) are used as fuel in boilers adapted to agro biomass. They have a good calorific value, but higher ash (usually around 3–7%) and more chlorine than wood, which requires a boiler resistant to corrosion and efficient ash handling. The buyer specifies the permissible fuel parameters in the specification.

For fuels subject to sustainability accounting (public support, ETS) the buyer usually requires proof from a certified scheme — in Poland most often KZR INiG or SURE. A fuel quality certificate (e.g. ENplus, Dobry Pellet) is a separate matter, required mainly on the retail market. The scope and the required scheme are best confirmed in the terms of the tender or in the contract with the buyer.

Both are voluntary schemes confirming the RED II sustainability criteria for biomass. KZR INiG is a national scheme, recognisable and often required in accounting on the Polish market; SURE has a European reach and is sometimes preferred in international contracts. Some organisations maintain both certificates, depending on their buyers.

With an inventory of the stream: how many tonnes per year you can realistically offer, in what form and with what parameters (laboratory tests: moisture, ash, NCV, chlorides, particle size distribution). Then classification under the EN ISO 17225 series of standards, establishing the requirements of target buyers, choosing a sustainability certification scheme and only at the end contracting.

Yes, but in practice small producers more often enter the chain through a first collection point that gathers biomass from many suppliers and holds the certificate (e.g. in KZR INiG) for the whole group. Independent certification pays off with large, stable volumes and your own logistics.

A mass balance is a supply chain model in which the amount of biomass sold as certified may not exceed the amount bought as certified (taking losses and conversion factors into account). An industrial buyer accounts for fuel sustainability on the basis of, among other things, certificates and mass balances of the whole chain — which is why it verifies the records of every link.

Author: Michał Cierpiałowski

Lead auditor for sustainability certification systems. For over 16 years he has been preparing pellet and biomass producers for ENplus, DINplus, SURE, KZR INiG and FSC certification — from gap analysis to support during the certification audit.

LinkedIn profile

Have a biomass stream and looking for a sales market?

We will help assess the parameters, choose the certification scheme and prepare the documentation for the requirements of industrial buyers.

Consult your stream